Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
RUN RING SYSTEM KIT
EVO054
The Evolve Run Ring System Kit can easily and quickly convert between a free running set-up and a semi-fixed set-up, offering maximum flexibility in one product (less for you to buy and store in your tackle box).
Angled Run Ring so weight hangs vertically on the cast for improved aerodynamics
Assembly or removal of the Running Sleeve quickly and easily converts the set-up
Running sleeve is easily attached/detached via its slot (no need to break the line)
Swivel alignment features in the Bead to ensure set-up always assembles optimally
Designed to ensure the Run Ring always releases from the Bead for a safe semi-fixed set-up
Long tapered top guides the Run Ring into position and provides added protection
Works with all lines, leaders and tubing
Supplied with Weight Links and Silicone Sleeves
Moulded in the Evolve ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Evolve Weight Clip Run Ring System is an innovative set-up where a lead clip type arrangement transforms to free running after a fish is hooked.
Designed to work perfectly with Evolve Swivel Weights, but will also work with all other swivel lead products.
The Clip has two swivel fittings (“+” &” -“) which have different release forces, so the set-up can be tuned to suit the size of weight/lead being used and angling situation requirements (what force you want the swivel to pull out of the Clip, and how quick the system converts to free running).
Both fittings are externally marked on the Clip with an “+” & “-“ for easy identification.
“-“ is typically for weights/leads up to 3oz, and “+” typically for weights/leads over 3oz (but can be set-up differently to achieve a specific operation).
The central channel of the Clip can be used to house the swivel eye in storage (swivel eye vertical in the slot), or slide the Clip up the line/leader/tubing and off the swivel.
The Clip features a side hole so the swivel can be restrained with PVA, for use with mesh PVA bags.
The rubber Plug holds the set-up under light tension in use, and becomes a shock absorbing bead once free running.
Tubing can be inserted into the bore at the rear end of the Plug, securing it in position.
Supplied with Weight Links for rapid attachment/detachment of the weight/lead, and Silicone Sleeves to fit over the Weight Link to eliminate tangles.
Moulded in the Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
Available in six per pack.
EVO054
The Evolve Run Ring System Kit can easily and quickly convert between a free running set-up and a semi-fixed set-up, offering maximum flexibility in one product (less for you to buy and store in your tackle box).
Angled Run Ring so weight hangs vertically on the cast for improved aerodynamics
Assembly or removal of the Running Sleeve quickly and easily converts the set-up
Running sleeve is easily attached/detached via its slot (no need to break the line)
Swivel alignment features in the Bead to ensure set-up always assembles optimally
Designed to ensure the Run Ring always releases from the Bead for a safe semi-fixed set-up
Long tapered top guides the Run Ring into position and provides added protection
Works with all lines, leaders and tubing
Supplied with Weight Links and Silicone Sleeves
Moulded in the Evolve ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Evolve Weight Clip Run Ring System is an innovative set-up where a lead clip type arrangement transforms to free running after a fish is hooked.
Designed to work perfectly with Evolve Swivel Weights, but will also work with all other swivel lead products.
The Clip has two swivel fittings (“+” &” -“) which have different release forces, so the set-up can be tuned to suit the size of weight/lead being used and angling situation requirements (what force you want the swivel to pull out of the Clip, and how quick the system converts to free running).
Both fittings are externally marked on the Clip with an “+” & “-“ for easy identification.
“-“ is typically for weights/leads up to 3oz, and “+” typically for weights/leads over 3oz (but can be set-up differently to achieve a specific operation).
The central channel of the Clip can be used to house the swivel eye in storage (swivel eye vertical in the slot), or slide the Clip up the line/leader/tubing and off the swivel.
The Clip features a side hole so the swivel can be restrained with PVA, for use with mesh PVA bags.
The rubber Plug holds the set-up under light tension in use, and becomes a shock absorbing bead once free running.
Tubing can be inserted into the bore at the rear end of the Plug, securing it in position.
Supplied with Weight Links for rapid attachment/detachment of the weight/lead, and Silicone Sleeves to fit over the Weight Link to eliminate tangles.
Moulded in the Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
Available in six per pack.
EVO047
Evolve Marker Weights are extremely robust and able to withstand extensive use on the hardest of lakebeds.
The Marker Weights design and construction offer several unique features to improve your marker set-up’s performance.
Lead-free and an ecologically better option
Ridges for amplified vibration and feel
Hard skin for improved transmission of vibrations
Integral design without hinged connections
Multiple surface textures to allow a better understanding of what the lakebed is made of
Moulded in the Evolve ‘marker green’ colour
Two same size per pack
DESCRIPTION
An innovative design and construction allow Evolve Marker Weights to be much smaller in size than you would expect for a lead-free weight.
A hard skin makes the weights extremely robust, easily withstanding extensive long-term use.
The hard construction enables better vibration transmission to the line/braid, so you feel more.
Ridges in the weights further amplify vibrations, for improved performance and sensitivity, giving you a better understanding of the lake bed in front of you.
All weights are finished with both textured and polished surfaces, so many bottom substrate types can be better identified after pulling over them.
Custom steel swivels are used throughout.
The swivel is integrally moulded into the weights, for minimised height and removing additional connections and hinging (to minimise tangle risks and loss of vibrational feedback).
Evolve Marker Weights are moulded in the Evolve ‘marker green’ colour, to complement the Evolve marker range of products.
Available in packs of two 3oz/85g weights.
EVO046
Evolve Back Weights are designed to keep your mainline pinned down, to avoid spooking fish, and aquatic obstacles.
Lead free and an ecologically better option
Unique self-closing mechanism allows easy one hand attachment/detachment
Solid hard plastic body enables superior low friction slide on the line
Solid hard plastic body ensures they cannot flex and fall off the line or damage
Designed not to pass over end tackle so they cannot contact the hooklink
Integral smooth design to prevent tangles
Moulded in the Evolve ‘dark camo’ colour
DESCRIPTION
A hard plastic body make the Back Weights extremely robust. The use of hard plastic means they do not suffer surface damage or allow line grooves to form in the clip with repeated use.
The integral hard plastic body allows for a high precision product with a unique design, construction and operation.
A spring loaded self-closing arm automatically shuts the line gate, which ensures they cannot fall off the line in use. This operation allows for easy one handed attachment and detachment from the line. The backleads do not need to flex in operation – A problem that often leads to other Back Weights coming undone (uncoupling) on the line and falling off in use.
The hard plastic clips slide on the line extremely well due to their low friction attributes. This enables them to be used without fear of snagging in the tip ring of the rod while playing a fish, and can be slid out much further on the line than is normally possible.
An integral design without additional connections or hinging linkages eradicates the possibility of them tangling on the line (even during the hardest battles).
Low centre of gravity design with a flat base means they will always orientate correctly in use.
Designed to not pass over end tackle, even if the weight/lead is ejected, so they cannot slide onto the hooklink.
Designed to not allow the weight to detach in use, to discourage unsafe angling practices (if you feel your Back Weight may get immovably snagged while playing a fish and you will need the Back Weight to detach from the line, we at Evolve Tackle feel you shouldn’t be using a ‘clip-on’ style Back Weight).
All Backleads moulded in the Evolve ‘dark camo’ colour.
Available in three per pack.
EVO045
Evolve Back Weights are designed to keep your mainline pinned down, to avoid spooking fish, and aquatic obstacles.
Lead free and an ecologically better option
Unique self-closing mechanism allows easy one hand attachment/detachment
Solid hard plastic body enables superior low friction slide on the line
Solid hard plastic body ensures they cannot flex and fall off the line or damage
Designed not to pass over end tackle so they cannot contact the hooklink
Integral smooth design to prevent tangles
Moulded in the Evolve ‘dark camo’ colour
DESCRIPTION
A hard plastic body make the Back Weights extremely robust. The use of hard plastic means they do not suffer surface damage or allow line grooves to form in the clip with repeated use.
The integral hard plastic body allows for a high precision product with a unique design, construction and operation.
A spring loaded self-closing arm automatically shuts the line gate, which ensures they cannot fall off the line in use. This operation allows for easy one handed attachment and detachment from the line. The backleads do not need to flex in operation – A problem that often leads to other Back Weights coming undone (uncoupling) on the line and falling off in use.
The hard plastic clips slide on the line extremely well due to their low friction attributes. This enables them to be used without fear of snagging in the tip ring of the rod while playing a fish, and can be slid out much further on the line than is normally possible.
An integral design without additional connections or hinging linkages eradicates the possibility of them tangling on the line (even during the hardest battles).
Low centre of gravity design with a flat base means they will always orientate correctly in use.
Designed to not pass over end tackle, even if the weight/lead is ejected, so they cannot slide onto the hooklink.
Designed to not allow the weight to detach in use, to discourage unsafe angling practices (if you feel your Back Weight may get immovably snagged while playing a fish and you will need the Back Weight to detach from the line, we at Evolve Tackle feel you shouldn’t be using a ‘clip-on’ style Back Weight).
All Backleads moulded in the Evolve ‘dark camo’ colour.
Available in three per pack.
EVO043
Evolve Back Weights are designed to keep your mainline pinned down, to avoid spooking fish, and aquatic obstacles.
Lead free and an ecologically better option
Unique self-closing mechanism allows easy one hand attachment/detachment
Solid hard plastic body enables superior low friction slide on the line
Solid hard plastic body ensures they cannot flex and fall off the line or damage
Designed not to pass over end tackle so they cannot contact the hooklink
Integral smooth design to prevent tangles
Moulded in the Evolve ‘dark camo’ colour
DESCRIPTION
A hard plastic body make the Back Weights extremely robust. The use of hard plastic means they do not suffer surface damage or allow line grooves to form in the clip with repeated use.
The integral hard plastic body allows for a high precision product with a unique design, construction and operation.
A spring loaded self-closing arm automatically shuts the line gate, which ensures they cannot fall off the line in use. This operation allows for easy one handed attachment and detachment from the line. The backleads do not need to flex in operation – A problem that often leads to other Back Weights coming undone (uncoupling) on the line and falling off in use.
The hard plastic clips slide on the line extremely well due to their low friction attributes. This enables them to be used without fear of snagging in the tip ring of the rod while playing a fish, and can be slid out much further on the line than is normally possible.
An integral design without additional connections or hinging linkages eradicates the possibility of them tangling on the line (even during the hardest battles).
Low centre of gravity design with a flat base means they will always orientate correctly in use.
Designed to not pass over end tackle, even if the weight/lead is ejected, so they cannot slide onto the hooklink.
Designed to not allow the weight to detach in use, to discourage unsafe angling practices (if you feel your Back Weight may get immovably snagged while playing a fish and you will need the Back Weight to detach from the line, we at Evolve Tackle feel you shouldn’t be using a ‘clip-on’ style Back Weight).
All Backleads moulded in the Evolve ‘dark camo’ colour.
Available in three per pack.
EVO048
Evolve Marker Weights are extremely robust and able to withstand extensive use on the hardest of lakebeds.
The Marker Weights design and construction offer several unique features to improve your marker set-up’s performance.
Lead-free and an ecologically better option
Ridges for amplified vibration and feel
Hard skin for improved transmission of vibrations
Integral design without hinged connections
Multiple surface textures to allow a better understanding of what the lakebed is made of
Moulded in the Evolve ‘marker green’ colour
Two same size per pack
DESCRIPTION
An innovative design and construction allow Evolve Marker Weights to be much smaller in size than you would expect for a lead-free weight.
A hard skin makes the weights extremely robust, easily withstanding extensive long-term use.
The hard construction enables better vibration transmission to the line/braid, so you feel more.
Ridges in the weights further amplify vibrations, for improved performance and sensitivity, giving you a better understanding of the lake bed in front of you.
All weights are finished with both textured and polished surfaces, so many bottom substrate types can be better identified after pulling over them.
Custom steel swivels are used throughout.
The swivel is integrally moulded into the weights, for minimised height and removing additional connections and hinging (to minimise tangle risks and loss of vibrational feedback).
Evolve Marker Weights are moulded in the Evolve ‘marker green’ colour, to complement the Evolve marker range of products.
Available in packs of two 4oz/113g weights.