Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
BACK WEIGHTS – 1.5OZ/42G
EVO045
Evolve Back Weights are designed to keep your mainline pinned down, to avoid spooking fish, and aquatic obstacles.
Lead free and an ecologically better option
Unique self-closing mechanism allows easy one hand attachment/detachment
Solid hard plastic body enables superior low friction slide on the line
Solid hard plastic body ensures they cannot flex and fall off the line or damage
Designed not to pass over end tackle so they cannot contact the hooklink
Integral smooth design to prevent tangles
Moulded in the Evolve ‘dark camo’ colour
DESCRIPTION
A hard plastic body make the Back Weights extremely robust. The use of hard plastic means they do not suffer surface damage or allow line grooves to form in the clip with repeated use.
The integral hard plastic body allows for a high precision product with a unique design, construction and operation.
A spring loaded self-closing arm automatically shuts the line gate, which ensures they cannot fall off the line in use. This operation allows for easy one handed attachment and detachment from the line. The backleads do not need to flex in operation – A problem that often leads to other Back Weights coming undone (uncoupling) on the line and falling off in use.
The hard plastic clips slide on the line extremely well due to their low friction attributes. This enables them to be used without fear of snagging in the tip ring of the rod while playing a fish, and can be slid out much further on the line than is normally possible.
An integral design without additional connections or hinging linkages eradicates the possibility of them tangling on the line (even during the hardest battles).
Low centre of gravity design with a flat base means they will always orientate correctly in use.
Designed to not pass over end tackle, even if the weight/lead is ejected, so they cannot slide onto the hooklink.
Designed to not allow the weight to detach in use, to discourage unsafe angling practices (if you feel your Back Weight may get immovably snagged while playing a fish and you will need the Back Weight to detach from the line, we at Evolve Tackle feel you shouldn’t be using a ‘clip-on’ style Back Weight).
All Backleads moulded in the Evolve ‘dark camo’ colour.
Available in three per pack.
EVO045
Evolve Back Weights are designed to keep your mainline pinned down, to avoid spooking fish, and aquatic obstacles.
Lead free and an ecologically better option
Unique self-closing mechanism allows easy one hand attachment/detachment
Solid hard plastic body enables superior low friction slide on the line
Solid hard plastic body ensures they cannot flex and fall off the line or damage
Designed not to pass over end tackle so they cannot contact the hooklink
Integral smooth design to prevent tangles
Moulded in the Evolve ‘dark camo’ colour
DESCRIPTION
A hard plastic body make the Back Weights extremely robust. The use of hard plastic means they do not suffer surface damage or allow line grooves to form in the clip with repeated use.
The integral hard plastic body allows for a high precision product with a unique design, construction and operation.
A spring loaded self-closing arm automatically shuts the line gate, which ensures they cannot fall off the line in use. This operation allows for easy one handed attachment and detachment from the line. The backleads do not need to flex in operation – A problem that often leads to other Back Weights coming undone (uncoupling) on the line and falling off in use.
The hard plastic clips slide on the line extremely well due to their low friction attributes. This enables them to be used without fear of snagging in the tip ring of the rod while playing a fish, and can be slid out much further on the line than is normally possible.
An integral design without additional connections or hinging linkages eradicates the possibility of them tangling on the line (even during the hardest battles).
Low centre of gravity design with a flat base means they will always orientate correctly in use.
Designed to not pass over end tackle, even if the weight/lead is ejected, so they cannot slide onto the hooklink.
Designed to not allow the weight to detach in use, to discourage unsafe angling practices (if you feel your Back Weight may get immovably snagged while playing a fish and you will need the Back Weight to detach from the line, we at Evolve Tackle feel you shouldn’t be using a ‘clip-on’ style Back Weight).
All Backleads moulded in the Evolve ‘dark camo’ colour.
Available in three per pack.
EVO055
The Evolve Weight Clip Run Ring System is a revolutionary set-up where a lead clip type arrangement transforms to free running after a fish is hooked.
The weight/lead sets the hook and then the system transforms to free running, so the fish cannot use the weight to eject the hook, and the angler doesn’t need to drop the weight/lead.
Better for the fish, the angler, and the environment!
Quickly transforms to free running after a fish is hooked
Two release fittings in the clip (+/-), so swivel release can be tuned to the size of weight being used and/or the angling situation requirements
Side hole for PVA string/tape to restrain swivel, so system can be used with mesh PVA bags
Works with lines, leaders and tubing
Clips supplied with Weight Links and Silicone Sleeves
Moulded in the Evolve ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Evolve Weight Clip Run Ring System is an innovative set-up where a lead clip type arrangement transforms to free running after a fish is hooked.
Designed to work perfectly with Evolve Swivel Weights, but will also work with all other swivel lead products.
The Clip has two swivel fittings (“+” &” -“) which have different release forces, so the set-up can be tuned to suit the size of weight/lead being used and angling situation requirements (what force you want the swivel to pull out of the Clip, and how quick the system converts to free running).
Both fittings are externally marked on the Clip with an “+” & “-“ for easy identification.
“-“ is typically for weights/leads up to 3oz, and “+” typically for weights/leads over 3oz (but can be set-up differently to achieve a specific operation).
The central channel of the Clip can be used to house the swivel eye in storage (swivel eye vertical in the slot), or slide the Clip up the line/leader/tubing and off the swivel.
The Clip features a side hole so the swivel can be restrained with PVA, for use with mesh PVA bags.
The rubber Plug holds the set-up under light tension in use, and becomes a shock absorbing bead once free running.
Tubing can be inserted into the bore at the rear end of the Plug, securing it in position.
Supplied with Weight Links for rapid attachment/detachment of the weight/lead, and Silicone Sleeves to fit over the Weight Link to eliminate tangles.
Moulded in the Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
Available in six per pack.
EVO036
The Evolve Leader Heli Kit is for use with helicopter and chod rigs on leaders.
For use with leadcore and similar diameter leaders
Three bead release fittings, so bead release can be tuned to the size of weight being used and angling situation
Long tapered base for smooth flow of the swivel over the sleeve
Tapered top to encourage the swivel pass back over the sleeve
Sleeves moulded in the Evolve translucent ‘dark camo’ colour for enhanced rig concealment
Beads moulded in tungsten rubber
Buffer Sleeves offer an external cutting guide to adjust the sleeves length to perfectly suit your set-up
Minimal size leader buffer sleeve for an unobtrusive and adjustable set-up
Buffer Sleeves moulded in the Evolve translucent ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The system is designed to enable effective bead release, to free the fish from the line and leader in all situations for enhanced fish safety.
The sleeve and bead have two ring features that interlock in use, and how far onto the sleeve you place the bead dictates the release force of the bead. In this way the set-up can be arranged to achieve three different release forces, allowing you to better tune your rig to the size of weight being used and the fishing situation. This means in the event of a line breakage, the fish will be able to rid itself of the line as quickly as possible, with both small and large weight/lead usage.
Position 1 (top) is ideal for short range use and small sized weights and baits.
Position 2 (middle) is ideal for medium range use and medium sized weights and baits.
Position 3 (bottom) is ideal for long range use and large sized weights and baits.
The sleeves are moulded in a custom compounded rubber for unparalleled grip on the line.
The sleeves can be assembled on to the leader with a fine gated needle.
The sleeves are moulded in the Evolve ‘dark camo’ colour for enhanced rig concealment.
The beads are moulded in tungsten rubber to ensure the system slowly sinks.
The beads have a large bore and are soft, so they can pass over knots and potential obstructions.
The Leader Heli Buffer Sleeves offer adjustability, and maximal protection, but with minimal size.
Available in six per pack.
EVO035
The Evolve Naked Heli Kit is for use with helicopter and chod rigs on mainlines.
For use with mainlines
Three bead release fittings, so bead release can be tuned to the size of weight being used and angling situation
Long tapered base for smooth flow of the swivel over the sleeve
Tapered top to encourage the swivel pass back over the sleeve
Sleeves supplied on an ergonomic fob and wires for ease of use
Sleeves moulded in the Evolve translucent ‘dark camo’ colour for enhanced rig concealment
Beads moulded in tungsten rubber
Buffer Sleeves offer an external cutting guide to adjust the sleeves length to perfectly suit your set-up
Minimal size naked buffer sleeve for an unobtrusive and adjustable set-up
Buffer Sleeves moulded in the Evolve translucent ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The system is designed to enable effective bead release, to free the fish from the line in all situations for enhanced fish safety.
The sleeve and bead have two ring features that interlock in use, and how far onto the sleeve you place the bead dictates the release force of the bead. In this way the set-up can be arranged to achieve three different release forces, allowing you to better tune your rig to the size of weight being used and the fishing situation. This means in the event of a line breakage, the fish will be able to rid itself of the line as quickly as possible, with both small and large weight/lead usage.
Position 1 (top) is ideal for short range use and small sized weights and baits.
Position 2 (middle) is ideal for medium range use and medium sized weights and baits.
Position 3 (bottom) is ideal for long range use and large sized weights and baits.
The sleeves are moulded in a custom compounded rubber for unparalleled grip on the line.
The sleeves are supplied on wires for easy assembly on to the line.
The sleeves are moulded in the Evolve ‘dark camo’ colour for enhanced rig concealment.
The beads are moulded in tungsten rubber to ensure the system slowly sinks.
The beads have a large bore and are soft, so they can pass over knots and potential obstructions.
The Naked Buffer Sleeves offer adjustability, and maximal protection, but with minimal size.
Available in six per pack.
EVO034
The Evolve Leader Heli Bead System is for use with helicopter and chod rigs on leaders.
For use with leadcore and similar diameter leaders
Three bead release fittings, so bead release can be tuned to the size of weight being used and angling situation
Long tapered base for smooth flow of the swivel over the sleeve
Tapered top to encourage the swivel pass back over the sleeve
Sleeves moulded in the Evolve translucent ‘dark camo’ colour for enhanced rig concealment
Beads moulded in tungsten rubber
DESCRIPTION
The system is designed to enable effective bead release, to free the fish from the line and leader in all situations for enhanced fish safety.
The sleeve and bead have two ring features that interlock in use, and how far onto the sleeve you place the bead dictates the release force of the bead. In this way the set-up can be arranged to achieve three different release forces, allowing you to better tune your rig to the size of weight being used and the fishing situation. This means in the event of a line breakage, the fish will be able to rid itself of the line as quickly as possible, with both small and large weight/lead usage.
Position 1 (top) is ideal for short range use and small sized weights and baits.
Position 2 (middle) is ideal for medium range use and medium sized weights and baits.
Position 3 (bottom) is ideal for long range use and large sized weights and baits.
The sleeves are moulded in a custom compounded rubber for unparalleled grip on the line.
The sleeves can be assembled on to the leader with a fine gated needle.
The sleeves are moulded in the Evolve ‘dark camo’ colour for enhanced rig concealment.
The beads are moulded in tungsten rubber to ensure the system slowly sinks.
The beads have a large bore and are soft, so they can pass over knots and potential obstructions.
Available in six per pack.
EVO033
The Evolve Naked Heli Bead System is for use with helicopter and chod rigs on mainlines.
For use with mainlines
Three bead release fittings, so bead release can be tuned to the size of weight being used and angling situation
Long tapered base for smooth flow of the swivel over the sleeve
Tapered top to encourage the swivel pass back over the sleeve
Sleeves supplied on an ergonomic fob and wires for ease of use
Sleeves moulded in the Evolve translucent ‘dark camo’ colour for enhanced rig concealment
Beads moulded in tungsten rubber
DESCRIPTION
The system is designed to enable effective bead release, to free the fish from the line in all situations for enhanced fish safety.
The sleeve and bead have two ring features that interlock in use, and how far onto the sleeve you place the bead dictates the release force of the bead. In this way the set-up can be arranged to achieve three different release forces, allowing you to better tune your rig to the size of weight being used and the fishing situation. This means in the event of a line breakage, the fish will be able to rid itself of the line as quickly as possible, with both small and large weight/lead usage.
Position 1 (top) is ideal for short range use and small sized weights and baits.
Position 2 (middle) is ideal for medium range use and medium sized weights and baits.
Position 3 (bottom) is ideal for long range use and large sized weights and baits.
The sleeves are moulded in a custom compounded rubber for unparalleled grip on the line.
The sleeves are supplied on wires for easy assembly on to the line.
The sleeves are moulded in the Evolve ‘dark camo’ colour for enhanced rig concealment.
The beads are moulded in tungsten rubber to ensure the system slowly sinks.
The beads have a large bore and are soft, so they can pass over knots and potential obstructions.
Available in six per pack.
EVO032
Evolve Heli Buffer Sleeves are for use with helicopter and chod rigs on leaders.
The Buffer Sleeves offer adjustability, and maximal protection, but with minimal size.
Round top and large bore to accommodate all lines and leader materials
Can also be used with naked setups where a barrel/line guard bead is used
Internal alignment features ensure the swivel/link always orientates to the best position, providing maximum wall thickness above the leader connection
External cutting guide ridges to adjust the sleeves length to perfectly suit your set-up
Minimal size for an unobtrusive set-up
Moulded in the Evolve translucent ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Buffer Sleeves have internal alignment features, which mean they always assembly the same way, ensuring the swivel/link always orientates to the best position, providing maximum wall thickness and protection above the leader connection/knot.
The sleeves can accommodate quick change links and weight/lead swivels.
The Sleeves feature external cutting grooves to aid repeated cutting to the perfect length for your application. This caters for all possible lengths that can be required (all potential set-up options).
Moulded in the translucent Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
EVO031
Evolve Heli Buffer Sleeves are for use with helicopter and chod rigs on mainlines.
The Buffer Sleeves offer adjustability, and maximal protection, but with minimal size.
Smooth tapered top to guide swivel into position and provide maximum line protection
Internal alignment features ensure the swivel/link always orientates to the best position, providing maximum wall thickness above the knot
External cutting guide ridges to adjust the sleeves length to perfectly suit your set-up
Minimal size for an unobtrusive set-up
Moulded in the Evolve translucent ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Buffer Sleeves have internal alignment features, which mean they always assembly the same way, ensuring the swivel/link always orientates to the best position, providing maximum wall thickness and protection above the leader connection/knot.
The sleeves can accommodate quick change links and weight/lead swivels.
The Sleeves feature external cutting grooves to aid repeated cutting to the perfect length for your application. This caters for all possible lengths that can be required (all potential set-up options).
Moulded in the translucent Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
EVO054
The Evolve Run Ring System Kit can easily and quickly convert between a free running set-up and a semi-fixed set-up, offering maximum flexibility in one product (less for you to buy and store in your tackle box).
Angled Run Ring so weight hangs vertically on the cast for improved aerodynamics
Assembly or removal of the Running Sleeve quickly and easily converts the set-up
Running sleeve is easily attached/detached via its slot (no need to break the line)
Swivel alignment features in the Bead to ensure set-up always assembles optimally
Designed to ensure the Run Ring always releases from the Bead for a safe semi-fixed set-up
Long tapered top guides the Run Ring into position and provides added protection
Works with all lines, leaders and tubing
Supplied with Weight Links and Silicone Sleeves
Moulded in the Evolve ‘dark camo’ finish for optimum rig concealment
DESCRIPTION
The Evolve Weight Clip Run Ring System is an innovative set-up where a lead clip type arrangement transforms to free running after a fish is hooked.
Designed to work perfectly with Evolve Swivel Weights, but will also work with all other swivel lead products.
The Clip has two swivel fittings (“+” &” -“) which have different release forces, so the set-up can be tuned to suit the size of weight/lead being used and angling situation requirements (what force you want the swivel to pull out of the Clip, and how quick the system converts to free running).
Both fittings are externally marked on the Clip with an “+” & “-“ for easy identification.
“-“ is typically for weights/leads up to 3oz, and “+” typically for weights/leads over 3oz (but can be set-up differently to achieve a specific operation).
The central channel of the Clip can be used to house the swivel eye in storage (swivel eye vertical in the slot), or slide the Clip up the line/leader/tubing and off the swivel.
The Clip features a side hole so the swivel can be restrained with PVA, for use with mesh PVA bags.
The rubber Plug holds the set-up under light tension in use, and becomes a shock absorbing bead once free running.
Tubing can be inserted into the bore at the rear end of the Plug, securing it in position.
Supplied with Weight Links for rapid attachment/detachment of the weight/lead, and Silicone Sleeves to fit over the Weight Link to eliminate tangles.
Moulded in the Evolve ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.
Available in six per pack.